R0106-HP MSR Router Series MPLS Command Reference(V7)

96
Field Descri
p
tion
Flag
Network information flags:
• A—Already synchronizes the information with CSPF.
• U—Updates the information with CSPF again after the previous
update fails.
• D—Deletes the information from CSPF again after the previous
deletion fails.
Attached Router ID of the attached router.
display ospf mpls te tunnel
Use display ospf mpls te tunnel to display OSPF tunnel interface information.
Syntax
display ospf [ process-id ] [ area area-id ] mpls te tunnel
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process ID in the range of 1 to 65535. If you do not specify this argument,
this command displays information about all OSPF processes.
area area-id: Specifies an area by its ID, an IP address or a decimal integer, in the range of 0 to
4294967295 . If you specify an integer, the system will translate the integer into the IP address format.
If you do not specify this option, this command displays information about all areas.
Examples
# Display OSPF tunnel interface information for all processes in all areas.
<Sysname> display ospf mpls te tunnel
OSPF Process 1 with Router ID 2.2.2.2
Traffic Engineering Tunnel
Area: 0.0.0.1
Interface: Tunnel1 (12.1.1.2)
State: Inactive
Neighbor ID: 0.0.0.0 Cost: 0
Destination: 125.1.1.1
Auto Route: IGP Shortcut
Metric: Relative 10
Table 37 Command output
Field Descri
p
tion
Interface Name and IP address of a tunnel interface.