R0106-HP MSR Router Series MPLS Command Reference(V7)

103
undo interface tunnel-bundle number
Default
No tunnel bundle interface exists on a device.
Views
System view
Predefined user roles
network-admin
Parameters
number: Specifies the tunnel bundle interface number. The following matrix shows the value ranges for
the number argument:
Hardware Value ran
g
e
MSR2000 0 to 1023
MSR3000 0 to 2047
MSR4000 0 to 4095
Usage guidelines
You can specify multiple member interfaces (MPLS TE tunnel interfaces) for a tunnel bundle interface. The
member interfaces form a tunnel bundle. When the outgoing interface is the tunnel bundle interface,
traffic can be forwarded through multiple MPLS TE tunnels, and load sharing is implemented.
Examples
# Create tunnel bundle interface Tunnel-Bundle 2 in load sharing mode, and enter the interface's view.
<Sysname> system-view
[Sysname] interface tunnel-bundle 2
[Sysname-tunnel-bundle2]
Related commands
• destination
• display tunnel-bundle
• member interface
link-management periodic-flooding timer
Use link-management periodic-flooding timer to configure the interval at which IGP floods TE
information.
Use undo link-management periodic-flooding timer to restore the default.
Syntax
link-management periodic-flooding timer interval
undo link-management periodic-flooding timer
Default
The IGP floods TE information every 180 seconds.