R0106-HP MSR Router Series MPLS Command Reference(V7)

125
Use undo mpls te max-link-bandwidth to restore the default.
Syntax
mpls te max-link-bandwidth bandwidth-value
undo mpls te max-link-bandwidth
Default
The maximum link bandwidth for MPLS TE traffic is 0 kbps.
Views
Interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the maximum link bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
The device carries the maximum link bandwidth in advertised IGP routes. The tunnel ingress node can
obtain the information and use the information in CSPF calculation to select a path that meets the tunnel
bandwidth requirements.
Examples
# On interface GigabitEthernet 2/1/1, configure the maximum link bandwidth for MPLS TE traffic as
1158 k b p s.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mpls te max-link-bandwidth 1158
Related commands
• display mpls te link-management bandwidth-allocation
• mpls te bandwidth
• mpls te max-reservable-bandwidth
• mpls te max-reservable-bandwidth mam
• mpls te max-reservable-bandwidth rdm
mpls te max-reservable-bandwidth
Use mpls te max-reservable-bandwidth to configure the maximum reservable bandwidth of the link (BC
0) and BC 1 in prestandard DS-TE RDM model.
Use undo mpls te max-reservable-bandwidth to restore the default.
Syntax
mpls te max-reservable-bandwidth bandwidth-value [ bc1 bc1-bandwidth ]
undo mpls te max-reservable-bandwidth
Default
The maximum reservable bandwidth of a link is 0 kbps and BC 1 is 0 kbps.