R0106-HP MSR Router Series MPLS Command Reference(V7)

127
Default
The maximum reservable bandwidth of a link is 0 kbps and each BC is 0 kbps.
Views
Interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the maximum reservable bandwidth of the link, in the range of 1 to
4294967295 kbps.
bc0 bc0-bandwidth: Specifies the value of BC 0, in the range of 1 to 4294967295 kbps. By default, BC
0 is 0 kbps.
bc1 bc1-bandwidth: Specifies the value of BC 1, in the range of 1 to 4294967295 kbps. By default, BC
1 is 0 kbps.
bc2 bc2-bandwidth: Specifies the value of BC 2, in the range of 1 to 4294967295 kbps. By default, BC
2 is 0 kbps.
bc3 bc3-bandwidth: Specifies the value of BC 3, in the range of 1 to 4294967295 kbps. By default, BC
3 is 0 kbps.
Usage guidelines
The device carries the bandwidth values configured by this command in IGP route advertisements. The
tunnel ingress node can obtain the information and use the information in CSPF calculation to select a
path that meets the tunnel bandwidth requirements.
The maximum reservable bandwidth of a link (bandwidth-value) cannot be greater than the maximum
bandwidth of the link (configured with the mpls te max-link-bandwidth command). Each BC
(bc0-bandwidth, bc1-bandwidth, bc2-bandwidth and bc3-bandwidth) cannot be greater than the
maximum reservable bandwidth of the link (bandwidth-value).
The maximum reservable bandwidth and BCs configured by this command are only for MPLS TE traffic.
Examples
# Configure the link maximum reservable bandwidth as 1158 kbps and BC 0 through BC 3 as 500 kbps,
300 kbps, 400 kbps, and 100 kbps for MPLS TE traffic in IETF DS-TE MAM model.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] mpls te max-reservable-bandwidth mam 1158 bc0 500 bc1 300
bc2 400 bc3 100
Related commands
• display mpls te link-management bandwidth-allocation
• mpls te bandwidth
• mpls te max-link-bandwidth
• mpls te max-reservable-bandwidth
• mpls te max-reservable-bandwidth rdm