R0106-HP MSR Router Series MPLS Command Reference(V7)

6
Field Description
State
Usage state of the label:
• Idle—The label is idle.
• Alloc—The label has been allocated.
• Pending—The label has been released but is still used by an LSP
entry.
• Inuse—The label has been allocated and used by an LSP entry.
display mpls lsp
Use display mpls lsp to display LSP information.
Syntax
display mpls lsp [ egress | in-label label-value | ingress | outgoing-interface interface-type
interface-number | protocol { bgp | ldp | local | rsvp-te | static | static-cr } | transit ] [ vpn-instance
vpn-instance-name ] [ ipv4-dest mask-length | ipv6 [ ipv6-dest prefix-length ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
egress: Displays the LSPs taking the current LSR as the egress.
in-label label-value: Displays the LSPs using the specified label as the incoming label, in the range of 0
to 1048575.
ingress: Displays the LSPs taking the current LSR as the ingress.
outgoing-interface interface-type interface-number: Displays the LSPs using the specified interface as the
outgoing interface. The interface-type interface-number argument specifies an interface by its type and
number.
protocol: Displays the LSPs established by a specific protocol.
bgp: Displays BGP LSPs.
ldp: Displays LDP LSPs.
local: Displays the direct LSP.
rsvp-te: Displays CRLSPs established by RSVP-TE.
static: Displays static LSPs.
static-cr: Displays static CRLSPs.
transit: Displays the LSPs taking the current LSR as a transit LSR.
vpn-instance vpn-instance-name: Displays LSPs for the specified VPN. The vpn-instance-name is a
case-sensitive string of 1 to 31 characters. If you do not specify this option, the command displays LSPs
for the public network.