R0106-HP MSR Router Series MPLS Command Reference(V7)

135
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
ff: Specifies the resource reservation style as fixed filter (FF).
se: Specifies the resource reservation style as shared explicit (SE).
Usage guidelines
This command applies only to MPLS TE tunnels established by RSVP-TE.
FF—Resources are reserved for individual senders and cannot be shared among senders on the same
session.
SE—Resources are reserved for senders on the same session and shared among them.
Examples
# Use the FF reservation style to establish MPLS TE tunnel 0.
<Sysname> system-view
[Sysname] interface tunnel 0 mode mpls-te
[Sysname-Tunnel0] mpls te resv-style ff
Related commands
• display mpls te tunnel-interface
• mpls te signaling
mpls te retry
Use mpls te retry to configure the maximum number of tunnel setup attempts.
Use undo mpls te retry to restore the default.
Syntax
mpls te retry times
undo mpls te retry
Default
The maximum number of tunnel setup attempts is 3.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
times: Specifies the number of tunnel setup attempts, in the range of 1 to 4294967295.
Usage guidelines
After failing to establish an MPLS TE tunnel, the tunnel ingress node waits for the tunnel setup retry
interval (configured by the mpls te timer retry command). Then it tries to set up the tunnel until the tunnel