R0106-HP MSR Router Series MPLS Command Reference(V7)

8
Table 4 Command output
Field Descri
p
tion
FEC
Forwarding equivalence class:
• IP address/mask—Classifies FECs by destination address.
• IP address—Classifies FECs by next hop.
• IP address/Out Label—Classifies FECs by next hop and outgoing
label.
• Ingress LSR ID/Tunnel ID/LSP ID—RSVP TE FEC.
• - (a hyphen)—The LSP is a static transit LSP, static egress LSP, static
transit CRLSP, or static egress CRLSP.
• Backup—If the LSP is a backup LSP of the previous LSP, this field
displays Backup.
Proto
Label distribution protocol:
• LDP.
• BGP.
• RSVP.
• Static.
• StaticCR—Static CRLSP.
• Local—Direct LSP.
In/Out Label Incoming label/outgoing label.
Interface/Out NHLFE
Outgoing interface name or NHLFE entry index.
NHLFEnumber specifies the outer LSP that carries the current LSP. The
outer LSP is that matches the NHLFE entry with an NID of number.
# Display IPv6 LSP information.
<Sysname> display mpls lsp ipv6
FEC : 100:100:100:100:100:100:100:100/128
Protocol : BGP In-Label : 2050
Out-Label: 10003 Out-Interface: Vlan10
BkLabel : 10004 BkInterface : Vlan20
Table 5 Command output
Field Descri
p
tion
FEC
Forwarding equivalence class:
• IP address/mask—Classifies FECs by destination address.
• IP address—Classifies FECs by next hop.
• IP address/Out Label—Classifies FECs by next hop and outgoing
label.
• Ingress LSR ID/Tunnel ID/LSP ID—RSVP TE FEC.
• - (a hyphen)—The LSP is a static transit LSP, static egress LSP, static
transit CRLSP, or static egress CRLSP.