R0106-HP MSR Router Series MPLS Command Reference(V7)

172
# Display detailed information about all RSVP resource reservation states.
<Sysname> display rsvp reservation verbose
Destination: 3.3.3.9 Source: 1.1.1.9
Tunnel ID: 1 Style: SE
Nexthop: 57.20.20.1 Nexthop LIH: 0x35
Received message epoch: 0 Received message ID: 0
In-Interface: GE2/1/4 Unknown object number: 0
Flow descriptor 1:
Flow specification:
Mean rate (CIR): 50.00 kbps Mean burst size (CBS): 1000.00 bytes
Path MTU: 1500 QoS service: Controlled-Load
Filter specification 1:
Sender address: 1.1.1.9 LSP ID: 23
Label: 3
RRO number: 3
57.20.20.1/32 Flag: 0x40 (No FRR/In-Int)
3 Flag: 0x01 (Global label)
3.3.3.9/32 Flag: 0x20 (No FRR/Node-ID)
Table 54 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Source Tunnel source address.
Style
Resource reservation style:
• SE—Shared-explicit style.
• FF—Fixed-filter style.
Nexthop LIH Logical interface handle of the local outgoing interface for the next hop.
Received message epoch Value of the Epoch field in the Message ID object of the received message.
Received message ID Message ID in the received message.
In-Interface Incoming interface of the message.
Unknown object number Number of unknown objects.
QoS service QoS service type: Controlled-Load or Guaranteed.
Sender address Sender address identifies the tunnel source end.
Label Outgoing label of the forward LSP.
RRO number
Number of RROs.
If the number is not 0, the subsequent output displays the IP addresses or
labels recorded in the RROs.
The RRO information is displayed only when route recording is configured
on the tunnel interface.