R0106-HP MSR Router Series MPLS Command Reference(V7)

175
Destination: 3.3.3.9 Source: 2.2.2.9
Tunnel ID: 253 Style: SE
Sender address: 2.2.2.9 LSP ID: 17767
Setup priority: 7 Holding priority: 7
FRR desired: Yes BW protection desired: Yes
Received upstream label: 1115 Sent upstream label: 1115
Previous hop: 57.10.10.1 Previous hop LIH: 0xf0008
Mean rate (CIR): 125.00 kbps Mean burst size (CBS): 0.00 bytes
MTU: 1500 Qos service: Controlled-Load
Received message epoch: 0 Received message ID: 0
Sent message epoch: 0 Sent message ID: 0
In-Interface: GE2/1/2 Local LIH: 0x67
Local address: 10.11.112.140 Refresh interval: 30000 ms
Out-Interface: GE2/1/6 Nexthop: 10.11.112.135
Unknown object number: 0
Received ERO number: 5
2.2.2.9/32 Strict
10.11.112.140/32 Strict
10.11.112.135/32 Strict
57.40.40.3/32 Strict
57.40.40.1/32 Strict
Sent ERO number: 3
10.11.112.135/32 Strict
57.40.40.3/32 Strict
57.40.40.1/32 Strict
XRO number: 1
67.40.40.1/32
RRO number: 0
Fast Reroute PLR: None
Fast Reroute MP: Active
In-Interface: GE2/1/2
Sender Template:
Sender address: 10.11.112.140 LSP ID: 5
Table 56 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Source LSR ID of the device at the tunnel source end.
Style
Resource reservation style:
• SE—Shared-explicit style.
• FF—Fixed-filter style.
Sender address Sender address identifies the tunnel source end.
FRR desired State of FRR, Yes or No.
BW protection desired State of bandwidth protection, Yes or No.
Received upstream label Backward LSP label received from the upstream device.
Sent upstream label Forward LSP label sent to the downstream device.