R0106-HP MSR Router Series MPLS Command Reference(V7)

185
Views
RSVP view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval at which RSVP refreshes Path and Resv messages, in the range of 10 to
65535 seconds.
Usage guidelines
This command does the following:
• Determines the interval for sending Path and Resv messages.
• Adds the locally configured refresh interval in the sent Path and Resv messages, so the peer device
can use this value to calculate the PSB and RSB timeout.
Examples
# Configure the refresh interval for Path and Resv messages as 60 seconds.
<Sysname> system-view
[Sysname] rsvp
[Sysname-rsvp] refresh interval 60
Related commands
keep-multiplier
reset rsvp authentication
Use reset rsvp authentication to clear RSVP security associations.
Syntax
reset rsvp authentication [ from ip-address to ip-address ]
Views
User view
Predefined user roles
network-admin
Parameters
from ip-address: Clears the RSVP security associations with the specified authentication source IP
address.
to ip-address: Clears the RSVP security associations with the specified authentication destination IP
address.
Usage guidelines
If you do not specify the from ip-address to ip-address options, this command clears the security
associations established with all RSVP neighbors.
Examples
# Clear all RSVP security associations.
<Sysname> reset rsvp authentication