R0106-HP MSR Router Series MPLS Command Reference(V7)

198
Tunnel policy commands
display mpls tunnel
Use display mpls tunnel to display tunnel information.
Syntax
display mpls tunnel { all | statistics | [ vpn-instance vpn-instance-name ] destination { tunnel-ipv4-dest |
tunnel-ipv6-dest } }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Displays all tunnels.
statistics: Displays tunnel statistics.
vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31
characters. If you do not specify a VPN instance, the command displays tunnel information for the public
network.
destination: Displays the tunnel destined for the specified address.
tunnel-ipv4-dest: Specifies the tunnel destination IPv4 address.
tunnel-ipv6-dest: Specifies the tunnel destination IPv6 address.
Examples
# Display information about all tunnels.
<Sysname> display mpls tunnel all
Destination Type Tunnel/NHLFE VPN Instance
2.2.2.2 LSP NHLFE1024 -
3.3.3.3 CRLSP Tunnel2 -
3.3.3.3 GRE Tunnel3 -
4.4.4.4 CRLSP Tunnel-Bundle0 -
Table 58 Command output
Field Descri
p
tion
Destination Tunnel destination address.
Type Tunnel type: LSP, GRE, or CRLSP (MPLS TE tunnel).
Tunnel/NHLFE
Tunnel, tunnel bundle, or NHLFE entry.
NHLFEnumber represents the ingress LSP that matches the NHLFE entry
with NID of number.