R0106-HP MSR Router Series MPLS Command Reference(V7)

208
Usage guidelines
If you do not specify any parameters, this command displays information about all BGP VPNv4 routes.
If you specify network-address mask or network-address mask-length, this command displays information
about the BGP VPNv4 route that exactly matches the specified address and mask.
If you specify only network-address, the system ANDs the network address with the mask of a route. If the
result matches the network address of the route, this command displays information about the BGP
VPNv4 route.
The active BGP process backs up BGP peers and routing information to the standby BGP process only
when BGP NSR is enabled. If BGP NSR is disabled, this command does not display anything when you
execute it with the standby keyword.
Examples
# Display brief information about all BGP VPNv4 routes for the active process.
<Sysname> display bgp routing-table vpnv4
BGP local router ID is 1.1.1.9
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
Total number of routes from all PEs: 2
Route distinguisher: 100:1(vpn1)
Total number of routes: 6
Network NextHop MED LocPrf PrefVal Path/Ogn
* > 10.1.1.0/24 10.1.1.2 0 32768 ?
* e 10.1.1.1 0 0 65410?
* > 10.1.1.2/32 127.0.0.1 0 32768 ?
* >i 10.3.1.0/24 3.3.3.9 0 100 0 ?
* >e 192.168.1.0 10.1.1.1 0 0 65410?
* i 3.3.3.9 0 100 0 65420?
Route distinguisher: 200:1
Total number of routes: 2
Network NextHop MED LocPrf PrefVal Path/Ogn
* >i 10.3.1.0/24 3.3.3.9 0 100 0 ?
* >i 192.168.1.0 3.3.3.9 0 100 0 65420?
# Display brief information about BGP VPNv4 routes with RD 100:1 for the active process.
<Sysname> display bgp routing-table vpnv4 route-distinguisher 100:1
BGP local router ID is 1.1.1.9
Status codes: * - valid, > - best, d - dampened, h - history,
s - suppressed, S - stale, i - internal, e - external