R0106-HP MSR Router Series MPLS Command Reference(V7)

220
OSPF Process 1 with Router ID 125.1.1.1
Sham link
Area Neighbor ID Source IP Destination IP State Cost
0.0.0.0 95.1.1.1 125.2.1.1 95.2.1.1 P-2-P 1
# Display OSPF sham link information for OSPF area 1.
<Sysname> display ospf sham-link area 1
OSPF Process 1 with Router ID 125.1.1.1
Sham link: 125.2.1.1 --> 95.2.1.1
Neighbor ID: 95.1.1.1 State: Full
Area: 0.0.0.0
Cost: 1 State: P-2-P Type: Sham
Timers: Hello 10s, Dead 40s, Retransmit 5s, Transmit Delay 1s
Request list: 0 Retransmit list: 0
MD5 authentication enabled.
The last key is 3.
The rollover is in progress, 1 neighbor(s) left.
display ip vpn-instance
Use display ip vpn-instance to display information about VPN instances.
Syntax
display ip vpn-instance [ instance-name vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
instance-name vpn-instance-name: Displays information about the specified VPN instance. The
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If you do not specify any VPN instance,
the command displays brief information about all VPN instances.
Examples
# Display brief information about all VPN instances.
<Sysname> display ip vpn-instance
Total VPN-Instances configured : 1
VPN-Instance Name RD Create time
abc 1:1 2011/05/18 10:48:17
Table 69 Command output
Field Descri
p
tion
VPN-Instance Name Name of the VPN instance.