R0106-HP MSR Router Series MPLS Command Reference(V7)

232
• import-route
• route-tag
• default tag
HP recommends configuring the same external route tag for PEs in the same area.
An external route tag is not transferred in any BGP extended community attribute. It takes effect only on
the PEs that receive BGP routes and generate OSPF Type 5 or 7 LSAs.
You can configure the same external route tag for different OSPF processes.
Examples
# In OSPF process 100, set the external route tag for redistributed VPN routes to 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] route-tag 100
Related commands
• default (Layer 3—IP Routing Command Reference)
• import-route (Layer 3—IP Routing Command Reference)
routing-table limit
Use routing-table limit to limit the maximum number of active routes in a VPN instance.
Use undo routing-table limit to restore the default.
Syntax
routing-table limit number { warn-threshold | simply-alert }
undo routing-table limit
Default
The maximum number of active routes depends on the device model.
Views
VPN instance view, IPv4 VPN view, IPv6 VPN view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of active routes. The following matrix shows the value ranges
and default values for the number argument:
Hardware Value ran
g
e Default
MSR2000 1 to 50000 50000
MSR3000 1 to 100000 100000
MSR4000 1 to 100000 100000
warn-threshold: Specifies a warning threshold in the range of 1 to 100 in percentage. When the
percentage of the number of existing active routes to the maximum number of active routes exceeds the