R0106-HP MSR Router Series MPLS Command Reference(V7)

243
IPv6 MPLS L3VPN commands
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
This chapter describes only IPv6 MPLS L3VPN-specific commands. For information about the commands
available for both IPv4 MPLS L3VPN and IPv6 MPLS L3VPN, see "MPLS L3VPN commands."
address-family ipv6 (VPN instance view)
Use address-family ipv6 to enter IPv6 VPN view.
Use undo address-family ipv6 to remove all configurations from IPv6 VPN view.
Syntax
address-family ipv6
undo address-family ipv6
Views
VPN instance view
Predefined user roles
network-admin
Usage guidelines
In IPv6 VPN view, you can configure IPv6 VPN parameters such as inbound and outbound routing
policies.
Examples
# Enter IPv6 VPN view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] address-family ipv6
[Sysname-vpn-ipv6-vpn1]
Related commands
address-family ipv4 (VPN instance view)
address-family vpnv6
Use address-family vpnv6 to create the BGP VPNv6 address family and enter its view.
Use undo address-family vpnv6 to remove the BGP VPNv6 address family and all configurations in
address family view.
Syntax
address-family vpnv6
undo address-family vpnv6