R0106-HP MSR Router Series MPLS Command Reference(V7)

18
Examples
# Configure the egress device to advertise an explicit null label to the penultimate hop.
<Sysname> system-view
[Sysname] mpls label advertise explicit-null
Related commands
reset mpls ldp
mpls lsr-id
Use mpls lsr-id to configure an LSR ID for the local LSR.
Use undo mpls lsr-id to delete the LSR ID of the local LSR.
Syntax
mpls lsr-id lsr-id
undo mpls lsr-id
Default
An LSR has no LSR ID.
Views
System view
Predefined user roles
network-admin
Parameters
lsr-id: Specifies an ID for identifying the LSR, in dotted decimal notation.
Usage guidelines
HP recommends that you use the address of a loopback interface on the LSR as the LSR ID.
Examples
# Configure the LSR ID as 3.3.3.3 for the local node.
<Sysname> system-view
[Sysname] mpls lsr-id 3.3.3.3
Related commands
lsr-id
mpls mtu
Use mpls mtu to configure the MPLS MTU for an interface.
Use undo mpls mtu to restore the default.
Syntax
mpls mtu value
undo mpls mtu