R0106-HP MSR Router Series MPLS Command Reference(V7)

261
undo connection connection-name
Default
No cross-connect is created.
Views
Cross-connect group view
Predefined user roles
network-admin
Parameters
connection-name: Specifies the name of the cross-connect, a case-sensitive string of 1 to 20 characters,
excluding hyphens.
Usage guidelines
A cross-connect is a point-to-point connection. You can perform the following operations in cross-connect
view:
• Execute ac interface and peer to connect an AC to a PW, so the PE can forward packets between
the AC and the PW.
• Execute ac interface twice to connect two ACs, so the PE can forward packets between the two ACs.
• Execute peer twice to connect two PWs to form a multi-segment PW.
• Execute ac interface and ccc to connect an AC to a remote CCC connection, so the PE can forward
packets between the AC and the remote CCC connection.
Examples
# Create cross-connect ac2pw for cross-connect group vpn1 and enter cross-connect view.
<Sysname> system-view
[Sysname] xconnect-group vpn1
[Sysname-xcg-vpn1] connection ac2pw
[Sysname-xcg-vpn1-ac2pw]
connection remote-site-id
Use connection remote-site-id to create an auto-discovery cross-connect and enter auto-discovery
cross-connect view. If the specified cross-connect has been created, the command opens auto-discovery
cross-connect view.
Use undo connection remote-site-id to remove the auto-discovery cross-connect.
Syntax
connection remote-site-id remote-site-id
undo connection remote-site-id remote-site-id
Default
No cross-connect is created.
Views
Site view
Predefined user roles
network-admin