R0106-HP MSR Router Series MPLS Command Reference(V7)

269
If you do not specify a peer or local, the command displays label blocks received from all peers and local
label blocks that match the received ones. If no local label block matches the received ones, the
command only displays the label blocks received from all peers.
A local label block matches the received label block if the local label block LO ≤ remote site ID ≤ local
label block LO + local label block LR – 1.
Examples
# Display brief information about label blocks received from all peers.
<Sysname> display l2vpn bgp
Total number of BGP PWs: 1, 1 up, 0 down
Xconnect-group Name: vpnb, Site ID:1
Rmt Site Offset RD Nexthop In/Out Label State
2 0 2:2 192.3.3.3 1036/1163 Up
Table 79 Command output
Field Descri
p
tion
Rmt Site ID of the remote site.
Offset Offset of the label block.
# Display detailed information about label blocks received from all peers.
<Sysname> display l2vpn bgp verbose
Xconnect-group Name: vpnb, Site ID:1
Remote Site ID : 2
Offset : 0
RD : 2:2
PW State : Up
Encapsulation : VLAN
MTU : 1500
Nexthop : 192.3.3.3
Local VC Label : 1036
Remote VC Label : 1163
Link ID : 1
Local Label Block : 1034/10/0
Remote Label Block : 1162/10/0
Export Route Target: 2:2
Table 80 Command output
Field Descri
p
tion
Local VC Label Incoming label of the PW.
Remote VC Label Outgoing label of the PW.
Link ID Link ID of the PW.
Local Label Block Local label block: label base/label range/Label-block offset.
Remote Label Block Remote label block: label base/label range/Label-block offset.
Export Route Target Route target of the remote label block.