R0106-HP MSR Router Series MPLS Command Reference(V7)

270
# Display brief information about all local label blocks.
<Sysname> display l2vpn bgp local
Xconnect-group Name: vpnb
Site Offset Range Label Base RD
1 0 10 1034 2:2
# Display detailed information about all local label blocks.
<Sysname> display l2vpn bgp local verbose
Xconnect-group Name: vpnb
Site ID : 1
Offset : 0
RD : 2:2
Range : 10
Label Base : 1034
Link ID : 1
Table 81 Command output
Field Descri
p
tion
Offset Offset of the label block.
RD RD of the label block. If no RD is configured, this field displays a hyphen (-).
Range Range of the label block.
Label Base Initial value of the label block.
Link ID
Link ID of the PW established using the label block.
The link ID is fixed to 1 because an MPLS L2VPN cross-connect can establish only
one BGP PW.
Related commands
display l2vpn pw
display l2vpn ldp
Use display l2vpn ldp to display LDP PW label information.
Syntax
display l2vpn ldp [ peer ip-address [ pw-id pw-id ] | xconnect-group group-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
peer ip-address: Displays LDP PW label information advertised by the specified peer PE. The ip-address
argument specifies the LSR ID of the peer PE. If you do not specify any peer PE, the command displays
LDP PW label information advertised by all peer PEs.