R0106-HP MSR Router Series MPLS Command Reference(V7)

276
network-operator
Parameters
xconnect-group group-name: Displays L2VPN information for Layer 3 interfaces bound to cross-connects
in the cross-connect group specified by its name, a case-sensitive string of 1 to 31 characters.
interface-type interface-number: Displays L2VPN information for the specified interface.
Usage guidelines
If you do not specify any parameters, this command displays L2VPN information for all Layer 3 interfaces
bound to cross-connects.
Examples
# Display L2VPN information for all Layer 3 interfaces bound to cross-connects.
<Sysname> display l2vpn interface
Total number of interfaces: 2, 2 up, 0 down
Interface Owner Link ID State Type
GE2/1/1 vpws1 1 Up VPWS
GE2/1/2 vpws2 1 Up VPWS
Table 88 Command output
Field Descri
p
tion
Owner Cross-connect group name.
Link ID Link ID of the AC.
Type
L2VPN type: VPLS or VPWS.
The current software version does not support VPLS.
display l2vpn pw
Use display l2vpn pw to display L2VPN PW information.
Syntax
display l2vpn pw [ xconnect-group group-name ] [ protocol { bgp | ldp | static } ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
xconnect-group group-name: Displays L2VPN PW information for the cross-connect group specified by
its name, a case-sensitive string of 1 to 31 characters. If you do not specify any group, the command
displays L2VPN PW information for all cross-connect groups.
protocol: Displays L2VPN PW information established by a specific protocol. If you do not specify any
protocol, the command displays L2VPN PW information established by all protocols.
bgp: Displays BGP PW information.