R0106-HP MSR Router Series MPLS Command Reference(V7)

277
ldp: Displays LDP PW information.
static: Displays static PW information, including remote CCC connections.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information.
Examples
# Display brief information about all L2VPN PWs.
<Sysname> display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 2
2 up, 0 blocked, 0 down, 0 defect, 0 idle, 0 duplicate
Xconnect-group Name: ldp
Peer PW ID/Rmt Site In/Out Label Proto Flag Link ID State
192.3.3.3 500 1299/1299 LDP M 0 Up
Xconnect-group Name: vpnb
Peer PW ID/Rmt Site In/Out Label Proto Flag Link ID State
192.3.3.3 2 1036/1163 BGP M 1 Up
Table 89 Command output
Field Descri
p
tion
Flag
PW flag:
• M—Primary PW.
• B—Backup PW.
PW ID/Rmt Site
This field displays the PW ID for a static or LDP PW, and displays the remote site ID
for a BGP PW.
Proto Protocol that established the PW, LDP, Static, or BGP.
Link ID Link ID of the PW.
State
PW state:
• Up—The PW is available.
• Down—The PW is not available.
• Blocked—The PW is a backup PW.
• Defect—BFD has detected a defect on the PW.
• Idle—The incoming label of the PW is not available.
• Dup—The incoming label of the static PW is used by a static LSP or a static
CRLSP.
# Display detailed information about all PWs.
<Sysname> display l2vpn pw verbose
Xconnect-group Name: ldp
Connection Name: ldp
Peer: 192.3.3.3 PW ID: 500
Signaling Protocol : LDP
Link ID : 0 PW State : Up
In Label : 1299 Out Label: 1299