R0106-HP MSR Router Series MPLS Command Reference(V7)

21
Syntax
mpls statistics interval interval
undo mpls statistics interval
Default
MPLS forwarding statistics reading is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the MPLS label forwarding statistics reading interval in the range of 30 to 65535
seconds.
Usage guidelines
To display MPLS label forwarding statistics by using the display mpls lsp verbose command, you must
perform the following tasks:
1. Use the mpls statistics command to enable the MPLS label forwarding statistics function.
2. Use the mpls statistics interval command to enable the MPLS statistics reading function.
Examples
# Enable MPLS label forwarding statistics reading, and set the reading interval to 30 seconds.
<Sysname> system-view
[Sysname] mpls statistics interval 30
Related commands
• display mpls lsp verbose
• mpls statistics
• reset mpls statistics
mpls ttl expiration enable
Use mpls ttl expiration enable to enable sending of MPLS TTL-expired messages.
Use undo mpls ttl expiration enable to disable the function.
Syntax
mpls ttl expiration enable
undo mpls ttl expiration enable
Default
The MPLS TTL-expired messages sending function is enabled.
Views
System view
Predefined user roles
network-admin