R0106-HP MSR Router Series MPLS Command Reference(V7)

294
rr-filter
Use rr-filter to configure the filtering of reflected L2VPN information. The route reflector only reflects the
L2VPN information that contains the specified extended community number.
Use undo rr-filter to restore the default.
Syntax
rr-filter extended-community-number
undo rr-filter
Default
The route reflector does not filter reflected L2VPN information.
Views
BGP L2VPN address family view
Predefined user roles
network-admin
Parameters
extended-community-number: Specifies an extended community number in the range of 1 to 199.
Usage guidelines
If a cluster has multiple route reflectors, you can configure different filtering policies on them to achieve
load sharing.
Examples
# Configure the route reflector to reflect only the BGP L2VPN information that contains the extended
community number 10.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family l2vpn
[Sysname-bgp-l2vpn] rr-filter 10
shutdown
Use shutdown to disable a cross-connect group.
Use undo shutdown to restore the default.
Syntax
shutdown
undo shutdown
Default
A cross-connect group is enabled.
Views
Cross-connect group view
Predefined user roles
network-admin