R0106-HP MSR Router Series MPLS Command Reference(V7)

302
Parameters
ipv4 dest-addr mask-length: Specifies an FEC by an IPv4 destination address and the destination address
mask length in the range of 0 to 32.
te tunnel tunnel-number: Specifies an MPLS TE tunnel by the tunnel interface number.
Usage guidelines
If you do not specify any parameter, this command displays BFD information for all LSP tunnels and all
MPLS TE tunnels.
Examples
# Display BFD information for the LSPs to destination 22.22.2.2/32.
<Sysname> display mpls bfd ipv4 22.22.2.2 32
Total number of sessions: 1, 1 up, 0 down, 0 init
FEC Type: LSP
FEC Info:
Destination: 22.22.2.2
Mask Length: 32
NHLFE ID: 1025
Local Discr: 513 Remote Discr: 513
Source IP: 11.11.1.1 Destination IP: 127.0.0.1
Session State: Up Session Role: Passive
Template Name: -
# Display BFD information for the MPLS TE tunnel interface tunnel 1.
<Sysname> display mpls bfd te tunnel 1
Total number of sessions: 1, 1 up, 0 down, 0 init
FEC Type: TE Tunnel
FEC Info:
Source Addr : 100.1.1.1
Destination Addr: 200.1.1.1
Tunnel ID : 1
LSP ID : 100
NHLFE ID: 1025
Local Discr: 513 Remote Discr: 513
Source IP: 11.11.1.1 Destination IP: 127.0.0.1
Session State: Up Session Role: Passive
Template Name: -
Table 95 Command output
Field Descri
p
tion
Local Discr Local discriminator of the BFD session.
Remote Discr Remote discriminator of the BFD session.
Source IP
Source IP of the BFD session, which is the MPLS LSR ID of the
local PE.