R0106-HP MSR Router Series MPLS Command Reference(V7)

Predefined user roles

network-admin

Parameters

all: Specifies all LSPs.

vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a string of 1 to 31 case-sensitive

characters. If you do not specify a VPN instance, the command clears MPLS forwarding statistics for the

public-network LSPs.

ipv4 ipv4-destination mask-length: Specifies the IPv4 LSP for an FEC specified by an IPv4 address and a

mask length. The mask length is in the range of 0 to 32.

ipv6 ipv6-destination prefix-length: Specifies the BGP-IPv6 LSP for an FEC specified by an IPv6 address

and a prefix length. The prefix length is in the range of 0 to 128.

static: Specifies static LSPs and static CRLSPs.

te ingress-lsr-id tunnel-id: Specifies an RSVP-TE tunnel. The ingress-lsr-id represents the LSR ID of the ingress

node of the tunnel. The tunnel-id argument represents the ID of the tunnel. The following matrix shows the

value ranges for the tunnel-id argument:

Hardware Value ran

MSR2000 0 to 1023

MSR3000 0 to 2047

MSR4000 0 to 4095

Examples

# Clear MPLS forwarding statistics for the LSP destined for 2.2.2.2/32.

<Sysname> reset mpls statistics ipv4 2.2.2.2 32

Related commands

• display mpls lsp verbose

• mpls statistics

• mpls statistics interval