R0106-HP MSR Router Series MPLS Command Reference(V7)

319
MPLS protection switching commands
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
bandwidth
Use bandwidth to configure the expected bandwidth of an interface.
Use undo bandwidth to restore the default.
Syntax
bandwidth bandwidth-value
undo bandwidth
Default
The expected bandwidth is 64 kbps.
Views
Tunnel bundle interface view
Predefined user roles
network-admin
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 400000000 kbps.
Usage guidelines
The expected bandwidth of an interface affects the CBQ bandwidth, and the link costs in OSPF, OSPFv3,
and IS-IS. For more information about the CBQ bandwidth, see ACL and QoS Configuration Guide. For
more information about the link costs, see Layer 3—IP Routing Configuration Guide.
Examples
# Set the expected bandwidth of Tunnel-Bundle 2 to 1000 kbps.
<Sysname> system-view
[Sysname] interface tunnel-bundle 2
[Sysname-tunnel-bundle2] bandwidth 1000
Related commands
display interface tunnel-bundle
default
Use default to restore the default settings for a tunnel bundle interface.
Syntax
default