R0106-HP MSR Router Series MPLS Command Reference(V7)

325
display mpls forwarding protection
Use display mpls forwarding protection to display the forwarding state information for MPLS protection
groups.
Syntax
MSR2000/MSR3000:
display mpls forwarding protection [ tunnel-bundle number ]
MSR4000:
display mpls forwarding protection [ tunnel-bundle number ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
tunnel-bundle number: Specifies an existing tunnel bundle interface by its number. If you do not specify
this option, this command displays the forwarding state information for all MPLS protection groups.
slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds
the card. If you do not specify this option, this command displays the forwarding state information for the
protection groups on the active MPUs. (MSR4000.)
Examples
# Display the forwarding state information for all MPLS protection groups.
<Sysname> display mpls forwarding protection
Total number of protection groups: 1
Group ID Working tunnel Protection tunnel State
2 100 200 UA:LO:R
Table 100 Command output
Field Descri
p
tion
Group ID ID of the protection group.
Working tunnel ID of the working tunnel.
Protection tunnel ID of the protection tunnel.