R0106-HP MSR Router Series MPLS Command Reference(V7)

328
Protection group type : Tunnel bundle
Tunnel bundle name : Tunnel-Bundle200
Working tunnel : Tunnel100
Protection tunnel : Tunnel200
Protection mode : 1:1
Switching mode : Bidirectional
Tunnel in use : Working-path
Working tunnel state : No defect
Protection tunnel state : Signal failure
Holdoff time : 5s (Remaining: 3s)
Wait to restore time : 30s (Remaining: 10s)
Message interval : 5s
Revertive mode : Revertive
State : UA:P:L
Table 102 Command output
Field Descri
p
tion
Protection group ID ID of the protection group.
Protection group type Tunnel type. The value can only be Tunnel bundle.
Tunnel bundle name Name of the tunnel bundle interface name for the protection group.
Working tunnel Tunnel interface name for the working tunnel.
Protection tunnel Tunnel interface name for the protection tunnel.
Protection mode Protection mode, 1+1 or 1:1.
Switching mode Switching mode, Bidirectional or Unidirectional.
Tunnel in use Tunnel in use, Working-path or Protection-path.
Working tunnel state
Working tunnel state:
• No defect.
• Signal failure—A failure is detected by a signaling protocol.
• OAM defect—A failure is detected by the OAM mechanism.
• Remote defect—A failure is received from the remote device.
Protection tunnel state
Protection tunnel state:
• No defect.
• Signal failure—A failure is detected by a signaling protocol.
• OAM defect—A failure is detected by the OAM mechanism.
• Remote defect—A failure is received from the remote device.
Holdoff time Holdoff time and the remaining holdoff time in seconds.
Wait to restore time
Wait time for the switchover from the protection tunnel to the working tunnel, and
the remaining wait time, in seconds.
Message interval PSC message sending interval in seconds.
Revertive mode Revertive mode, Revertive or Non-revertive.