R0106-HP MSR Router Series MPLS Command Reference(V7)

332
You cannot modify the protection switching mode for a tunnel bundle interface by executing this
command multiple times.
Examples
# Create tunnel bundle interface Tunnel-Bundle 2 in 1:1 protection switching mode, and enter the tunnel
bundle interface view.
<Sysname> system-view
[Sysname] interface tunnel-bundle 2 protection onetoone
[Sysname-tunnel-bundle2]
Related commands
• destination
• display tunnel bundle
• member interface
• mpls protection
member interface
Use member interface to specify a member interface for a tunnel bundle interface.
Use undo member interface to delete a member interface from a tunnel bundle interface.
Syntax
member interface tunnel tunnel-number [ protection ]
undo member interface tunnel tunnel-number
Default
No member interface is specified for a tunnel bundle interface.
Views
Tunnel bundle interface view
Predefined user roles
network-admin
Parameters
tunnel-number: Specifies a member interface by the interface number. The following matrix shows the
value ranges for the number argument:
Hardware Value ran
g
e
MSR2000 0 to 1023
MSR3000 0 to 2047
MSR4000 0 to 4095
protection: Specifies a member interface as the backup member interface. If you do not specify this
keyword, the specified member interface is the primary member interface. The tunnel for the primary
member interface is the working tunnel. The tunnel for the backup member interface is the protection
tunnel.