R0106-HP MSR Router Series MPLS Command Reference(V7)

39
Field Descri
p
tion
Auto-config
LDP automatic configuration information:
• If LDP autoconfiguration is enabled, this field displays IGP process
information, such as OSPF process ID and OSPF area ID.
• If LDP autoconfiguration is disabled, this field displays a hyphen (-).
Related commands
• mpls ldp
• mpls ldp enable
display mpls ldp lsp
Use display mpls ldp lsp to display information about LSPs generated by LDP.
Syntax
display mpls ldp lsp [ vpn-instance vpn-instance-name ] [ destination-address mask-length ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. The command displays LDP LSP information for the specified VPN. If you do not
specify a VPN instance, the command displays LDP LSP information for the public network.
destination-address mask-length: Specifies an FEC by an IP address and a mask length in the range of 0
to 32. If you do not specify an FEC, the command displays information about LDP LSPs for all FECs.
Examples
# Display LDP LSP information for the public network.
<Sysname> display mpls ldp lsp
Status Flags: * - stale, L - liberal, B - backup
FECs: 4 Ingress: 1 Transit: 1 Egress: 3
FEC In/Out Label Nexthop OutInterface
1.1.1.1/32 -/3 10.1.1.1 GE2/0/2
1151/3 10.1.1.1 GE2/0/2
-/1025(B) 30.1.1.1 GE2/0/3
1151/1025(B) 30.1.1.1 GE2/0/3
2.2.2.2/32 3/-
-/1151(L)
10.1.1.0/24 1149/-
-/1149(L)
192.168.1.0/24 1150/-
-/1150(L)