R0106-HP MSR Router Series MPLS Command Reference(V7)

40
Table 17 Command output
Field Descri
p
tion
Status Flags
LSP status:
• *—Stale, indicating the LSP is under a GR process.
• L—Liberal, indicating the LSP is not available.
• B—Backup, indicating a backup LSP.
FECs Total number of FECs.
Ingress Number of LSPs that take the local device as the ingress node.
Transit Number of LSPs that take the local device as a transit node.
Egress Number of LSPs that take the local device as the egress node.
FEC Forwarding equivalence class identified by an IP prefix.
In/Out Label Incoming/outgoing label.
Nexthop Next hop address for the FEC.
OutInterface Outgoing interface for the FEC.
Related commands
display mpls lsp
display mpls ldp parameter
Use display mpls ldp parameter to display LDP running parameters.
Syntax
display mpls ldp parameter [ vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. The command displays the LDP running parameters for the specified VPN. If you
do not specify a VPN instance, the command displays the LDP running parameters for the public
network.
Examples
# Display LDP running parameters for the public network.
<Sysname> display mpls ldp parameter
Global Parameters:
Protocol Version : V1 IGP Sync Delay on Restart : 90 sec
Nonstop Routing : Off Graceful Restart : Off
Reconnect Time : 120 sec Forwarding State Hold Time: 360 sec
DSCP Value : 48