R0106-HP MSR Router Series MPLS Command Reference(V7)

Field Descri

tion

Whether GR is enabled on the peer.

• On—Enabled.

• Off—Disabled.

MD5

Whether MD5 authentication is enabled for the LDP session on the local device.

• On—Enabled.

• Off—Disabled.

KA Sent/Rcvd Number of keepalive messages sent/received.

# Display detailed information about all LDP peers and LDP sessions for the public network.

<Sysname> display mpls ldp peer verbose

Peer LDP ID : 100.100.100.20:0

Local LDP ID : 100.100.100.17:0

TCP Connection : 100.100.100.20:47515 -> 100.100.100.17:646

Session State : Operational Session Role : Passive

Session Up Time : 0000:00:03 (DD:HH:MM)

Max PDU Length : 4096 bytes (Local: 4096 bytes, Peer: 4096 bytes)

Keepalive Time : 45 sec (Local: 45 sec, Peer: 45 sec)

Keepalive Interval : 15 sec

Msgs Sent/Rcvd : 288/426

KA Sent/Rcvd : 13/13

Label Adv Mode : DU Graceful Restart : On

Reconnect Time : 120 sec Recovery Time : 360 sec

Loop Detection : On Path Vector Limit: 32

Discovery Sources:

Targeted Hello 100.100.100.17 -> 100.100.100.20 (Active, Passive)

Hello Hold Time: 45 sec Hello Interval : 15000 ms

GigabitEthernet2/0/2

Hello Hold Time: 15 sec Hello Interval : 5000 ms

Label Acceptance Policy : prefix-from-20

Session Protection : On

State : Ready Duration : 120 sec

Addresses received from peer:

202.118.224.20 100.100.100.20 11.22.33.44 1.2.3.10

1.2.3.4

Table 20 Command output

Field Descri

tion

Peer LDP ID LDP identifier of the peer.

Local LDP ID LDP identifier of the local LSR.

TCP connection

TCP connection information for the session, including the IP addresses and

port numbers used by both ends of the TCP connection, and whether MD5

authentication is enabled for the TCP connection. If MD5 authentication is

enabled, MD5 On is displayed. If MD5 is not enabled, this field is blank.