R0106-HP MSR Router Series MPLS Command Reference(V7)

46
slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds
the card. (MSR4000.)
Usage guidelines
If executed without any parameters, this command displays LDP summary information for the public
network.
Examples
# Display LDP summary information for the public network.
<Sysname> display mpls ldp summary
VPN Instance Name : Public
Instance ID : 0
Instance State : Active
Interfaces : 1 (1 active)
Targeted Peers : 0
Adjacencies : 1
Peers : 1
Operational : 1 (0 GR)
OpenSent : 0
OpenRecv : 0
Initialized : 0
Non-Existent: 0
Table 21 Command output
Field Descri
p
tion
Instance ID VPN instance identifier. A value of 0 represents the public network.
Instance State LDP status in the VPN instance, Active or Inactive.
Interfaces
Number of interfaces enabled with LDP.
active: Number of interfaces running LDP.
Targeted Peers
Number of peers discovered by the LDP extended discovery mechanism,
including the manually specified peers and the automatically established
peers.
Adjacencies Number of Hello adjacencies.
Peers Total number of peers.
Operational
Number of peers in Operational state.
GR: Number of GR-capable peers.
OpenSent Number of peers in OpenSent state.
OpenRecv Number of peers in OpenRecv state.
Initialized Number of peers in Initialized state.
Non-Existent Number of peers in Non-Existent state.
dscp
Use dscp to specify a DSCP value for outgoing LDP packets.
Use undo dscp to restore the default.