R0106-HP MSR Router Series MPLS Command Reference(V7)

59
mpls ldp igp sync disable
Use mpls ldp igp sync disable to disable LDP-IGP synchronization on an interface.
Use undo mpls ldp igp sync disable to restore the default.
Syntax
mpls ldp igp sync disable
undo mpls ldp igp sync disable
Default
LDP-IGP synchronization is enabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
After you enable LDP-IGP synchronization for an OSPF area or an IS-IS process, LDP-IGP synchronization
is enabled on the OSPF process interfaces or the IS-IS process interfaces by default. To disable LDP-IGP
synchronization on an interface, execute the mpls ldp igp sync disable command on that interface.
Examples
# Disable LDP-IGP synchronization on GigabitEthernet 2/0/1.
<Sysname> System-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] mpls ldp igp sync disable
Related commands
• mpls ldp sync (IS-IS view)
• mpls ldp sync (OSPF view/OSPF area view)
mpls ldp sync (IS-IS view)
Use mpls ldp sync to enable LDP-ISIS synchronization.
Use undo mpls ldp sync to disable LDP-ISIS synchronization.
Syntax
mpls ldp sync [ level-1 | level-2 ]
undo mpls ldp sync [ level-1 | level-2 ]
Default
LDP-ISIS synchronization is disabled.
Views
IS-IS view
Predefined user roles
network-admin