R0106-HP MSR Router Series MPLS Command Reference(V7)

74
Examples
# Disable the explicit path named path1.
<Sysname> system-view
[Sysname] explicit-path path1
[Sysname-explicit-path-path1] disable
display explicit-path
Use display explicit-path to display information about explicit paths.
Syntax
display explicit-path [ path-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
path-name: Displays information about the explicit path specified by its name, a case-sensitive string of
1 to 31 characters. If you do not specify this argument, the command displays information about all
explicit paths.
Examples
# Display information about all explicit paths.
<Sysname> display explicit-path
Path Name: path1 Hop Count: 3 Path Status: Enabled
Index IP Address Hop Type Hop Attribute
1 1.1.1.1 Strict Include
101 2.2.2.2 Loose Include
201 3.3.3.3 - Exclude
Table 22 Command output
Field Descri
p
tion
Path Name Name of the explicit path.
Hop Count Number of nodes specified in the explicit path.
Path Status
Explicit path status:
• Enabled—The explicit path is available.
• Disabled—The explicit path is not available.
Index Index of a node on the explicit path.
IP Address IP address of a node on the explicit path.
Hop Type
Node type:
• Strict—The node must be connected directly to its previous
hop.
• Loose—The node can be connected indirectly to its previous
hop.