R0106-HP MSR Router Series MPLS Command Reference(V7)

80
LAN ID : 0000.0000.0004.04
Frag ID : 0x00
Flags : -/-/-
Attached routers : 0000.0000.0001
0000.0000.0004
Table 25 Command output
Field Descri
p
tion
TE information for IS-IS(1) TE information for IS-IS process 1.
LAN ID Broadcast network ID, in the format of System-ID.Pseudonode-ID.
Frag ID LSP fragment number.
Flags
State flag for network information:
• A—Already synchronizes network information with CSPF.
• U—Ready to update network information with CSPF again after the
previous update failed.
• D—Ready to delete network information from CSPF again after the
previous deletion failed.
display isis mpls te tunnel
Use display isis mpls te tunnel to display IS-IS tunnel interface information.
Syntax
display isis mpls te tunnel [ level-1 | level-2 ] [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level-1: Displays tunnel interface information for Level-1 routers.
level-2: Displays tunnel interface information for Level-2 routers.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. If you do not specify an IS-IS
process, the command displays tunnel information for all IS-IS processes.
Usage guidelines
If you do not specify the level-1 or level-2 keyword, the command displays IS-IS tunnel interface
information for both Level-1 and Level-2 routers.
Examples
# Display IS-IS tunnel interface information.
<Sysname> display isis mpls te tunnel
MPLS-TE tunnel information for IS-IS(1)
---------------------------------------