R0106-HP MSR Router Series MPLS Command Reference(V7)

89
Table 33 Command output
Field Descri
p
tion
MPLS LSR-ID MPLS LSR ID of a router, in dotted decimal notation.
IGP Type Internal gateway protocol: OSPF or IS-IS.
Process ID IGP process ID.
Area OSPF area of the router.
Level IS-IS level of the router: Level-1 or Level-2.
Local IP Address Local interface address.
Neighbor IP Address
Remote interface address for a P2P or P2MP link.
For an NBMA or a broadcast link, this field is blank.
Link Type
Link type:
• P2P.
• P2MP.
• NBMA.
• Broadcast.
Link Status Link status: Active or Inactive.
Bandwidth Constraint Mode
Bandwidth constraint model:
• Prestandard DS-TE RDM.
• IETF DS-TE RDM.
• IETF DS-TE MAM.
display mpls te tunnel-interface
Use display mpls te tunnel-interface to display information about MPLS TE tunnel interfaces.
Syntax
display mpls te tunnel-interface [ tunnel number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
tunnel number: Displays information about the tunnel interface specified by its number. If you do not
specify this option, the command displays information about all MPLS TE tunnel interfaces.
Examples
# Display information about all MPLS TE tunnel interfaces.
<Sysname> display mpls te tunnel-interface
Tunnel Name : Tunnel 0
Tunnel State : Up (Main CRLSP up)
Tunnel Attributes :