R0106-HP MSR Router Series MPLS Configuration Guide(V7)

142
# Execute the display mpls lsp command or the display mpls static-cr-lsp command on each router to
display static CRLSP information.
[RouterA] display mpls lsp
FEC Proto In/Out Label Interface/Out NHLFE
1.1.1.1/0/1 StaticCR -/20 GE2/1/1
2.1.1.2 Local -/- GE2/1/1
[RouterB] display mpls lsp
FEC Proto In/Out Label Interface/Out NHLFE
- StaticCR 20/30 GE2/1/2
3.2.1.2 Local -/- GE2/1/2
[RouterC] display mpls lsp
FEC Proto In/Out Label Interface/Out NHLFE
- StaticCR 30/- -
[RouterA] display mpls static-cr-lsp
Name LSR Type In/Out Label Out Interface State
static-cr-lsp-1 Ingress Null/20 GE2/1/1 Up
[RouterB] display mpls static-cr-lsp
Name LSR Type In/Out Label Out Interface State
static-cr-lsp-1 Transit 20/30 GE2/1/2 Up
[RouterC] display mpls static-cr-lsp
Name LSR Type In/Out Label Out Interface State
static-cr-lsp-1 Egress 30/Null - Up
# Execute the display ip routing-table command on Router A. The output shows a static route entry with
interface Tunnel 0 as the output interface. (Details not shown.)