R0106-HP MSR Router Series MPLS Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

161

162

163

164

165

166

167

168

169

170

154

[RouterD-LoopBack0] isis enable 1

[RouterD-LoopBack0] isis circuit-level level-2

[RouterD-LoopBack0] quit

# Execute the display ip routing-table command on each router to verify that the routers have

learned the routes to one another, including the routes to the loopback interfaces. (Details not

shown.)

3. Configure an LSR ID, and enable MPLS, MPLS TE, and RSVP:

# Configure Router A.

[RouterA] mpls lsr-id 1.1.1.9

[RouterA] mpls te

[RouterA-te] quit

[RouterA] rsvp

[RouterA-rsvp] quit

[RouterA] interface gigabitethernet 2/1/1

[RouterA-GigabitEthernet2/1/1] mpls enable

[RouterA-GigabitEthernet2/1/1] mpls te enable

[RouterA-GigabitEthernet2/1/1] rsvp enable

[RouterA-GigabitEthernet2/1/1] quit

# Configure Router B.

[RouterB] mpls lsr-id 2.2.2.9

[RouterB] mpls te

[RouterB-te] quit

[RouterB] rsvp

[RouterB-rsvp] quit

[RouterB] interface gigabitethernet 2/1/1

[RouterB-GigabitEthernet2/1/1] mpls enable

[RouterB-GigabitEthernet2/1/1] mpls te enable

[RouterB-GigabitEthernet2/1/1] rsvp enable

[RouterB-GigabitEthernet2/1/1] quit

[RouterB] interface pos 2/2/0

[RouterB-POS2/2/0] mpls enable

[RouterB-POS2/2/0] mpls te enable

[RouterB-POS2/2/0] rsvp enable

[RouterB-POS2/2/0] quit

# Configure Router C.

[RouterC] mpls lsr-id 3.3.3.9

[RouterC] mpls te

[RouterC-te] quit

[RouterC] rsvp

[RouterC-rsvp] quit

[RouterC] interface gigabitethernet 2/1/1

[RouterC-GigabitEthernet2/1/1] mpls enable

[RouterC-GigabitEthernet2/1/1] mpls te enable

[RouterC-GigabitEthernet2/1/1] rsvp enable

[RouterC-GigabitEthernet2/1/1] quit

[RouterC] interface pos 2/2/0

[RouterC-POS2/2/0] mpls enable