R0106-HP MSR Router Series MPLS Configuration Guide(V7)

189
To create and configure a VPN instance:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a VPN instance and
enter VPN instance view.
ip vpn-instance vpn-instance-name
By default, no VPN instance is
created.
3. Configure an RD for the VPN
instance.
route-distinguisher
route-distinguisher
By default, no RD is specified for a
VPN instance.
4. (Optional.) Configure a
description for the VPN
instance.
description text
By default, no description is
configured for a VPN instance.
5. (Optional.) Configure a VPN
ID for the VPN instance.
vpn-id vpn-id
By default, no VPN ID is configured
for a VPN instance.
6. (Optional.) Configure an
SNMP context for the VPN
instance.
snmp context-name context-name
By default, no SNMP context is
configured.
The following matrix shows the maximum number of VPN instances that can be created in the system:
Hardware Maximum value
MSR2000 1023
MSR3000 2047
MSR4000 4095
Associating a VPN instance with an interface
After creating and configuring a VPN instance, associate the VPN instance with the interface connected
to the CE.
To associate a VPN instance with an interface:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Associate a VPN instance with
the interface.
ip binding vpn-instance
vpn-instance-name
By default, no VPN instance is
associated with an interface.
The ip binding vpn-instance
command deletes the IP address of
the current interface. You must
reconfigure an IP address for the
interface after configuring the
command.
Configuring route related attributes for a VPN instance
Ste
p
Command Remarks
1. Enter system view.
system-view N/A