R0106-HP MSR Router Series MPLS Configuration Guide(V7)

210
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter BGP-VPN instance
view.
ip vpn-instance vpn-instance-name N/A
4. Configure an EBGP peer.
peer { group-name | ip-address }
as-number as-number
By default, no BGP peer is
configured.
5. Enter BGP-VPN IPv4 unicast
address family view.
address-family ipv4 [ unicast ] N/A
6. Enable BGP to exchange
IPv4 unicast routes with the
peer.
peer { group-name | ip-address } enable
By default, BGP does not
exchange IPv4 unicast
routes with any peer.
7. Allow the local AS number
to appear in the AS_PATH
attribute of routes received
from the peer, and set the
maximum number of
repetitions.
peer { group-name | ip-address }
allow-as-loop [ number ]
By default, BGP discards
incoming route updates
that contain the local AS
number.
8. Redistribute remote site
routes advertised by the PE
into BGP.
import-route protocol [ { process-id |
all-processes } [ allow-direct | med
med-value | route-policy
route-policy-name ] * ]
By default, no routes are
redistributed into BGP.
9. (Optional.) Configure
filtering of advertised
routes.
filter-policy { acl-number | prefix-list
prefix-list-name } export [ protocol
process-id ]
By default, BGP does not
filter advertised routes.
10. (Optional.) Configure
filtering of received routes.
filter-policy { acl-number | prefix-list
prefix-list-name } import
By default, BGP does not
filter received routes.
2. Configure a VPN site:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Configure the MCE as an
EBGP peer.
peer { group-name | ip-address }
as-number as-number
N/A
4. Enter BGP-VPN IPv4 unicast
address family view.
address-family ipv4 [ unicast ] N/A
5. Enable BGP to exchange
IPv4 unicast routes with the
peer.
peer { group-name | ip-address }
enable
By default, BGP does not
exchange IPv4 unicast routes
with any peer.