R0106-HP MSR Router Series MPLS Configuration Guide(V7)

265
[PE1] interface loopback 0
[PE1-LoopBack0] ip address 3.3.3.9 32
[PE1-LoopBack0] quit
[PE1] mpls lsr-id 3.3.3.9
[PE1] mpls ldp
[PE1-ldp] quit
[PE1] isis 1
[PE1-isis-1] network-entity 10.0000.0000.0000.0004.00
[PE1-isis-1] quit
[PE1] interface loopback 0
[PE1-LoopBack0] isis enable 1
[PE1-LoopBack0] quit
[PE1] interface pos 2/1/1
[PE1-Pos2/1/1] ip address 30.1.1.1 24
[PE1-Pos2/1/1] isis enable 1
[PE1-Pos2/1/1] mpls enable
[PE1-Pos2/1/1] mpls ldp enable
[PE1-Pos2/1/1] mpls ldp transport-address interface
[PE1-Pos2/1/1] quit
[PE1] bgp 100
[PE1-bgp] peer 4.4.4.9 as-number 100
[PE1-bgp] peer 4.4.4.9 connect-interface loopback 0
[PE1-bgp] address-family vpnv4
[PE1-bgp-vpnv4] peer 4.4.4.9 enable
[PE1-bgp-vpnv4] quit
[PE1-bgp] quit
# Configure PE 2 in the same way that PE 1 is configured. (Details not shown.)
# On PE 1, verify that the LDP session has been established.
[PE1] display mpls ldp peer
Total number of peers: 1
Peer LDP ID State LAM Role GR MD5 KA Sent/Rcvd
4.4.4.9:0 Operational DU Active Off Off 8/8
# On PE 1, verify that the BGP peer relationship in Established state has been established.
[PE1] display bgp peer vpnv4
BGP local router ID: 3.3.3.9
Local AS number: 100
Total number of peers: 1 Peers in established state: 1
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
4.4.4.9 100 3 6 0 0 00:00:32 Established
# On PE 1, verify that the IS-IS neighbor relationship has been established.
[PE1] display isis peer
Peer information for ISIS(1)
----------------------------
System Id: 0000.0000.0005