R0106-HP MSR Router Series MPLS Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

291

292

293

294

295

296

297

298

299

300

289

[PE1-ospf-10-area-0.0.0.0] quit

[PE1-ospf-10] quit

# Configure OSPF process 20 between MCE and PE 1, and redistribute routes from RIP process 20

into OSPF. (Details not shown.)

Verifying the configuration

# Verify that PE 1 has learned the static route of VPN 1 through OSPF.

[PE1] display ip routing-table vpn-instance vpn1

Destinations : 13 Routes : 13

Destination/Mask Proto Pre Cost NextHop Interface

0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

20.1.1.0/24 Direct 0 0 20.1.1.2 GE2/1/1.1

20.1.1.0/32 Direct 0 0 20.1.1.2 GE2/1/1.1

20.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0

20.1.1.255/32 Direct 0 0 20.1.1.2 GE2/1/1.1

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0

192.168.0.0/24 O_ASE 150 1 20.1.1.1 GE2/1/1.1

224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0

224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0

255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0

# Verify that PE 1 has learned the RIP route of VPN 2 through OSPF.

[PE1] display ip routing-table vpn-instance vpn2

Destinations : 13 Routes : 13

Destination/Mask Proto Pre Cost NextHop Interface

0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0

30.1.1.0/24 Direct 0 0 30.1.1.2 GE2/1/1.2

30.1.1.0/32 Direct 0 0 30.1.1.2 GE2/1/1.2

30.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0

30.1.1.255/32 Direct 0 0 30.1.1.2 GE2/1/1.2