R0106-HP MSR Router Series MPLS Configuration Guide(V7)

322
Ste
p
Command Remarks
2. Configure an IPv6 static
route for an IPv6 VPN
instance.
ipv6 route-static vpn-instance s-vpn-instance-name
ipv6-address prefix-length { interface-type
interface-number [ next-hop-address ] | nexthop-address
[ public ] | vpn-instance d-vpn-instance-name
nexthop-address } [ permanent ] [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
By default, no IPv6
static route is
configured.
3. (Optional.) Configure
the default preference for
IPv6 static routes.
ipv6 route-static default-preference
default-preference-value
The default value is
60.
Configuring RIPng between an MCE and a PE
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a RIPng process for an
IPv6 VPN instance and enter
RIPng view.
ripng [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Redistribute VPN routes.
import-route protocol [ process-id ]
[ allow-ibgp ] [ allow-direct | cost
cost | route-policy
route-policy-name ] *
By default, no routes are
redistributed into RIPng.
4. (Optional.) Configure the
default cost value for
redistributed routes.
default cost value The default value is 0.
5. Return to system view.
quit N/A
6. Enter interface view.
interface interface-type
interface-number
N/A
7. Enable the RIPng process on
the interface.
ripng process-id enable
By default, RIPng is disabled on an
interface.
Configuring OSPFv3 between an MCE and a PE
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an OSPFv3 process for
an IPv6 VPN instance and
enter OSPFv3 view.
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
N/A
3. Set the router ID.
router-id router-id N/A
4. Redistribute VPN routes.
import-route protocol [ process-id
| all-processes | allow-ibgp ]
[ allow-direct | cost cost |
route-policy route-policy-name |
type type ] *
By default, no routes are
redistributed into OSPFv3.