R0106-HP MSR Router Series MPLS Configuration Guide(V7)

323
Ste
p
Command Remarks
5. (Optional.) Configure filtering
of advertised routes.
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ bgp4+ | direct | isisv6
process-id | ospfv3 process-id |
ripng process-id | static ]
By default, redistributed routes are
not filtered.
6. Return to system view.
quit N/A
7. Enter interface view.
interface interface-type
interface-number
N/A
8. Enable the OSPFv3 process on
the interface.
ospfv3 process-id area area-id
[ instance instance-id ]
By default, OSPFv3 is disabled on
an interface.
Configuring IPv6 IS-IS between an MCE and a PE
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an IS-IS process for an
IPv6 VPN instance and enter
IS-IS view.
isis [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Configure a network entity title.
network-entity net By default, no NET is configured.
4. Enable IPv6 for the IS-IS
process.
ipv6 enable By default, IPv6 is disabled.
5. (Optional.) Redistribute VPN
routes.
ipv6 import-route protocol
[ process-id ] [ allow-ibgp ]
[ allow-direct | cost cost | [ level-1
| level-1-2 | level-2 ] |
route-policy route-policy-name |
tag tag ] *
By default, IPv6 IS-IS does not
redistribute routes from any other
routing protocol.
If you do not specify the route level
in the command, the command
redistributes routes to the level-2
routing table.
6. (Optional.) Configure filtering
of advertised routes.
ipv6 filter-policy { acl6-number |
prefix-list prefix-list-name |
route-policy route-policy-name }
export [ protocol [ process-id ] ]
By default, IPv6 IS-IS does not filter
advertised routes.
7. Return to system view.
quit N/A
8. Enter interface view.
interface interface-type
interface-number
N/A
9. Enable the IPv6 IS-IS process
on the interface.
isis ipv6 enable [ process-id ]
By default, IPv6 IS-IS is disabled on
an interface.
Configuring EBGP between an MCE and a PE
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter BGP-VPN instance view.
ip vpn-instance vpn-instance-name
N/A