R0106-HP MSR Router Series MPLS Configuration Guide(V7)

324
Ste
p
Command Remarks
4. Configure the PE as an EBGP
peer.
peer { group-name |
ipv6-address } as-number
as-number
By default, no BGP peer is
configured.
5. Enter BGP-VPN IPv6 unicast
address family view.
address-family ipv6 [ unicast ] N/A
6. Enable BGP to exchange IPv6
unicast routes with the
specified peer.
peer { group-name | ip-address }
enable
By default, BGP does not exchange
IPv6 unicast routes with any peer.
7. Redistribute VPN routes.
import-route protocol [ { process-id
| all-processes } [ allow-direct |
med med-value | route-policy
route-policy-name ] * ]
By default, no routes are
redistributed into BGP.
8. (Optional.) Configure filtering
of advertised routes.
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
By default, BGP does not filter
advertised routes.
9. (Optional.) Configure filtering
of received routes.
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
import
By default, BGP does not filter
received routes.
Configuring IBGP between an MCE and a PE
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter BGP-VPN instance
view.
ip vpn-instance vpn-instance-name N/A
4. Configure the PE as an
IBGP peer.
peer { group-name | ip-address } as-number
as-number
N/A
5. Enter BGP-VPN IPv6
unicast address family
view.
address-family ipv6 [ unicast ] N/A
6. Enable BGP to exchange
IPv6 unicast routes with
the peer.
peer { group-name | ipv6-address } enable
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
7. Redistribute the VPN
routes of the VPN site.
import-route protocol [ { process-id |
all-processes } [ allow-direct | med
med-value | route-policy
route-policy-name ] * ]
By default, no routes are
redistributed into BGP.
8. (Optional.) Configure
filtering of advertised
routes.
filter-policy { acl6-number | prefix-list
ipv6-prefix-name } export [ protocol
process-id ]
By default, BGP does not filter
advertised routes.
9. (Optional.) Configure
filtering of received routes.
filter-policy { acl6-number | prefix-list
ipv6-prefix-name } import
Optional.
By default, BGP does not filter
received routes.