R0106-HP MSR Router Series MPLS Configuration Guide(V7)

327
Task Command Remarks
Display outgoing labels for all BGP
VPNv6 routes (MSR4000).
display bgp routing-table vpnv6 outlabel
[ standby slot slot-number ]
Available in any view.
Display BGP VPNv6 address
family update group information.
display bgp update-group vpnv6
[ ip-address ]
Available in any view.
For more information about the display ipv6 routing-table, display bgp group vpnv6, display bgp peer
vpnv6, and display bgp update-group vpnv6 commands, see Layer 3—IP Routing Command Reference.
IPv6 MPLS L3VPN configuration examples
Configuring IPv6 MPLS L3VPNs
Network requirements
CE 1 and CE 3 belong to VPN 1. CE 2 and CE 4 belong to VPN 2.
VPN 1 uses route target attributes 111:1. VPN 2 uses route target attributes 222:2. Users of different VPNs
cannot access each other.
Run EBGP between CEs and PEs to exchange VPN routing information.
PEs use OSPF to communicate with each other and use MP-IBGP to exchange VPN routing information.
Figure 81 Network diagram
Table 27 Interface and IP assignment
Device Interface IP address
Device Interface IP address
CE 1 GE2/1/1 2001:1::1/96 P Loop0 2.2.2.9/32
PE 1 Loop0 1.1.1.9/32 POS2/1/0 172.1.1.2/24
GE2/1/1 2001:1::2/96 POS2/1/1 172.2.1.1/24
CE 1
Loop0
Loop0 Loop0
PE 1
PE 2
GE2/1/1
GE2/1/1
GE2/1/2
GE2/1/1
POS2/1/0
GE2/1/1
GE2/1/2
GE2/1/1
GE2/1/1
CE 3
CE 2
CE 4
POS2/1/0
POS2/1/1
POS2/1/0
VPN 1
VPN 1
VPN 2
VPN 2
MPLS backbone
AS 65410 AS 65430
AS 65420
AS 65440
P