R0106-HP MSR Router Series MPLS Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

331

332

333

334

335

336

337

338

339

340

331

[PE1-vpn-instance-vpn1] route-distinguisher 100:1

[PE1-vpn-instance-vpn1] vpn-target 111:1

[PE1-vpn-instance-vpn1] quit

[PE1] ip vpn-instance vpn2

[PE1-vpn-instance-vpn2] route-distinguisher 100:2

[PE1-vpn-instance-vpn2] vpn-target 222:2

[PE1-vpn-instance-vpn2] quit

[PE1] interface gigabitethernet 2/1/1

[PE1-GigabitEthernet2/1/1] ip binding vpn-instance vpn1

[PE1-GigabitEthernet2/1/1] ipv6 address 2001:1::2 96

[PE1-GigabitEthernet2/1/1] quit

[PE1] interface gigabitethernet 2/1/2

[PE1-GigabitEthernet2/1/2] ip binding vpn-instance vpn2

[PE1-GigabitEthernet2/1/2] ipv6 address 2001:2::2 96

[PE1-GigabitEthernet2/1/2] quit

# Configure PE 2.

[PE2] ip vpn-instance vpn1

[PE2-vpn-instance-vpn1] route-distinguisher 200:1

[PE2-vpn-instance-vpn1] vpn-target 111:1

[PE2-vpn-instance-vpn1] quit

[PE2] ip vpn-instance vpn2

[PE2-vpn-instance-vpn2] route-distinguisher 200:2

[PE2-vpn-instance-vpn2] vpn-target 222:2

[PE2-vpn-instance-vpn2] quit

[PE2] interface gigabitethernet 2/1/1

[PE2-GigabitEthernet2/1/1] ip binding vpn-instance vpn1

[PE2-GigabitEthernet2/1/1] ipv6 address 2001:3::2 96

[PE2-GigabitEthernet2/1/1] quit

[PE2] interface gigabitethernet 2/1/2

[PE2-GigabitEthernet2/1/2] ip binding vpn-instance vpn2

[PE2-GigabitEthernet2/1/2] ipv6 address 2001:4::2 96

[PE2-GigabitEthernet2/1/2] quit

# Configure IP addresses for the CEs according to Figure 81. (Details not shown.)

# Execute the display ip vpn-instance command on the PEs to display information about the VPN

instances, for example, on PE 1.

[PE1] display ip vpn-instance

Total VPN-Instances configured : 2

VPN-Instance Name RD Create time

vpn1 100:1 2012/02/13 12:49:08

vpn2 100:2 2012/02/13 12:49:20

# Use the ping command on the PEs to verify that the PEs can ping their attached CEs, for example,

on PE 1.

[PE1] ping ipv6 -vpn-instance vpn1 2001:1::1

Ping6(56 bytes) 2001:1::2 --> 2001:1::1, press CTRL_C to break

56 bytes from 2001:1::1, icmp_seq=0 hlim=64 time=9.000 ms

56 bytes from 2001:1::1, icmp_seq=1 hlim=64 time=1.000 ms

56 bytes from 2001:1::1, icmp_seq=2 hlim=64 time=0.000 ms

56 bytes from 2001:1::1, icmp_seq=3 hlim=64 time=0.000 ms