R0106-HP MSR Router Series MPLS Configuration Guide(V7)
387
Ste
p
Command
Remarks
4. Create a remote CCC
connection.
ccc in-label in-label-value out-label
out-label-value { nexthop nexthop |
out-interface interface-type
interface-number } [ pw-class class-name ]
By default, no remote CCC
connection is created.
Use the out-interface keyword to
specify the outgoing interface
only on a point-to-point link. On
other types of interfaces such as
Layer 3 Ethernet interface, VLAN
interface, and Layer 3 aggregate
interface, you must use the
nexthop keyword to specify the IP
address of the next hop.
Binding an AC to a cross-connect
This task is mutually exclusive with Ethernet link aggregation. If a Layer 3 interface has been added to a
link aggregation group, you cannot bind the interface to a cross-connect, and vice versa.
If the AC is a Layer 3 interface, bind the Layer 3 interface to the cross-connect.
After you bind a Layer 3 interface to a cross-connect, packets received from the Layer 3 interface are
forwarded through the PW or another AC bound to the cross-connect.
To bind a Layer 3 interface to a non-BGP cross-connect:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter cross-connect group
view.
xconnect-group group-name N/A
3. Enter cross-connect view.
connection connection-name N/A
4. Bind the Layer 3 interface to
the cross-connect.
ac interface interface-type
interface-number
By default, no Layer 3 interface is
bound to the cross-connect.
To bind a Layer 3 interface to a BGP cross-connect:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter cross-connect group
view.
xconnect-group group-name N/A
3. Enter auto-discovery
cross-connect group view.
auto-discovery bgp N/A
4. Enter site view.
site site-id [ range range-value ]
[ default-offset default-offset-value ]
N/A
5. Enter auto-discovery
cross-connect view.
connection remote-site-id
remote-site-id
N/A
6. Bind the Layer 3 interface to
the BGP cross-connect.
ac interface interface-type
interface-number
By default, no Layer 3 interface is
bound to the BGP cross-connect.