R0106-HP MSR Router Series MPLS Configuration Guide(V7)

441
514/514 1.1.1.1 127.0.0.1 Up 1127ms Tunnel2
5. Configure a static route to 4.4.4.4/32 through Tunnel-Bundle 0.
[RouterA] ip route-static 4.4.4.4 32 tunnel-bundle 0 preference 1
Verifying the configuration
# Execute the display tunnel-bundle command on Router A to display information about the tunnel
bundle interface and its member interfaces.
[RouterA] display tunnel-bundle
Tunnel-Bundle Name : Tunnel-Bundle 0
Bundle State : Up
Bundle Attributes :
Bundle Mode : 1:1
Tunnel Type : CR-LSP
Tunnel Destination : 4.4.4.4
Bundle Members :
Member State Weight Role
Tunnel1 Up 1 Working
Tunnel2 Up 1 Protection
# Execute the display mpls tunnel all command on Router A to display information about the tunnel
bundle for the tunnel bundle interface.
[RouterA] display mpls tunnel all
Destination Type Tunnel/NHLFE VPN Instance
4.4.4.4 CRLSP Tunnel-Bundle0 -
# Execute the display mpls lsp protocol local verbose command on Router A to display information about
local LSPs for the tunnel bundle interface.
[RouterA] display mpls lsp protocol local verbose
Destination : 4.4.4.4
FEC : TunBDL0
Protocol : TE
LSR Type : Ingress
Service : -
NHLFE ID : 536870912
State : Active
Out-Interface: Tun1
BkInterface : Tun2
# Execute the display mpls protection command on Router A to display MPLS protection group
information.
[RouterA] display mpls protection
Total number of protection-groups: 1
Group Type Work-tunnel ID Protect-tunnel ID State
0 Tunnel-bundle 1 2 N